Why does the Challenger 3 TD keep -10 gun depression with the L55A1 while Leopards were nerfed to -7.4?

devs have an obstacle in their skull and they took info from a different leopard tank as a source for 2A8.

Basically.

1 Like

XSW IR light may not help there either with how the cable is placed…
(which 2 A7 NOR, 2 A7+ (PSO) and 2 A7 DNK have btw)
I know that ingame PSO has that too, who knows whether this means its also affected, but KNDS has rebranded all PSO’s to “2 A7+” in 2010 and listed L/44 as option for it so… not impossible.

Then again, all of gaijins “primary sources” are based on a 2 A7 NOR brochure KNDS copy pasted 2 times.

…which they value over the norwegian 2 A8 datasheet btw, despite the Leopard 2 A8 brochure being about as accurate to 2 A8 specs as a 2 A6M brochure would be;

As I said, its literally a 1:1, word for word, copy paste of 2 A7 NOR brochure, well except for the number, a new font and a blue stripe ofc.
They couldnt even be bothered to add even a singular Leopard 2 A8 picture, so those showing “2 A7+” [rebrand for PSO] have “Leopard 2 A8” as caption, nor to remove “executive brochure norway” from the metadata.

The argument that L55A1 causes this change to elevation angles is ofc complete nonsense. If they argued the new FCS that was used on 2 A7 NOR and 2 A8 compared to e.g. 2 A7V and stuff was the reason, then sure, that may very well be the case (okay maybe not that either because the company that makes it + the gun still lists -9° to +20° but whatever)

But nuh uh, they just went with the first excuse they could come up with before bothering to check whether this is even plausible in the slightest way.

Also worth pointing out that they do not have a singular source for Leopard 2 A7V btw
Probably goes without saying but “2 A7”/“2 A7+” is not exactly specifc to any version when KMW has been using this name for literally everything since 2010.

Height of the roof? Or maybe internal layout of fhe roof inside? Who knows?

EVen if its “only bout gun itself” it doesnt particularly mean Challenger has to have that change too. Neither it means leopards with older model of the cannon should have the nerf. It only means something is blocking the gun, or the manufacturers decided to forbid that angle. It can be internal layout of the turret (new fuze box or cables on the roof for examble, or even new spal liners being thicker), it can be something with the length of the cannon breech or the recoil mechanism being longer, ect ect ect. Or it may be (as with gun depression being removed on the 90* angle to the side) just a manufacturer desicion.

Its most modern tank, no one would show you all of it insides.

There’s a Camera/light above the breach of the 2a7+ and 2a7NO that most likely where the limit for vertical comes from.

Seems like so, they probs needed space under the roof for electrical work