Both the Leopard and the Challenger 3 TD use the exact same 120mm L55A1 gun, and there is no physical obstacle on the Leopard blocking it.
So if it’s the exact same gun, why is the gun depression limited to -7.4 on Leopards while the Challenger 3 TD gets -10? What is the obstacle here?
Different turret and hull though.
The gun may be the same, but the turret layout and size, as well as the hull, are all different. The fact that they have the same gun does not mean they have the same characteristics. By your logic, the XM800T and the Weisel 1a4 should have the same gun depression.
It’s not about l55a1. It’s just a barrel. It doesn’t effect depression
Because the report they accepted for the depression nerf was based on a completely different tank not seen in game. Being the 2a7+ it’s completely irrelevant to 2a7V and 2a8 it’s just classic gaijin stupidity
You’re right; I’m aware that it’s not the barrel itself, but rather the turret geometry and the breech clearance that determine the gun’s depression angle.
My question is: looking at the in-game models of the Leopard 2A7V and 2A8, what exactly is the specific part that physically prevents the gun from reaching a -9 depression angle? I’m just curious.
Nothing. The report used wrong information using a source about 2a7+ (yes I know it was called 2a8 but it’s just wrong and outdated) where a camera spectus was in the way on the upper hull while on 2a7V and 2a8 it’s on the lower hull.

Here’s a photo of the 2a7+ showing spectus on the upper hull
Since turret design is what determines gun depression, does any official brochure for the Challenger 3 TD actually state -10?
Girlie I don’t know. I genuinely don’t care for challangers.
It’s not turret design tho it’s because the hull again from wrong information
I’m just guessing here, but the Rh-120 L/55 A1 cannon is designed to withstand a higher chamber pressure, that would probably require a stronger and thus larger breech that would decrease the elevation and depression angles.
Nope. Not at all. It’s the exact same as l55 just with better construction
My point is this: If the Challenger 3 TD can achieve a gun depression angle of -10 based on the hull and turret design of older Challenger models without the need for new technical documentation shouldn’t the Leopard 2A7V and 2A8 models also naturally possess a -9 depression angle, given that they share the same hull/turret configuration and lack any physical obstructions that would hinder the movement of the gun, just like other members of the Leopard 2 family (2A4, 2A5, 2A6)?
Girlie have you read anything I’ve put. 2a7V and 2a8 have -9 lmao it’s not correct in game anymore because gaijin used a report on a separate tank where spectus was on the upper hull.
The challanger the l55a1 is all Irrelevant. Idk how your considering the two are connected.
I agree with you 100%, I wasn’t arguing against your point. I only brought up the Challenger 3 TD to highlight Gaijin’s double standard in how they apply sources using assumptions for one while blindly applying a wrong hull report to the 2A7V and 2A8.
My only point is: if Gaijin claims this restriction is about the L55A1 gun, then the Challenger 3 TD should also be -7.4. If it’s about physical hull/turret clearance, then since neither the Challenger 3 TD (-10) nor the in-game 2A7V/2A8 have any physical obstacle blocking the gun, the 2A7V and 2A8 should be -9 just like the rest of the Leopard 2s.
Regardless of whether the report is accurate the Leo2A7/8 had it’s depression reduced as someone found a brochure that stated that was it’s depression, so all the Leo2s with the L/55 A1 cannon had their elevation angles changed to that. Challenger 3 stayed the same as it’s not the same turret/ hull as the Leo2A7/8 and there has so far been no documents suggesting that it’s in accurate.
I’m not making any comment on the accuracy of these changes, just pointing out why they happened.
Okay, I understand that the turret and hull are not the same. The thing is, the 2A7V and 2A8 get -7.4 because they use the L55A1 gun, and other Leopard models were subjected to the same nerf as well. Only the Leopards using the L44 gun (including the Strvs) managed to keep -9. What I want to know is: if the report states that the L55A1 gun has -7.4, why doesn’t this apply to the “3 TD” model? Furthermore, if the -10 value on the “3 TD” is explained by the lack of a physical obstacle on the Challenger hull/turret, there is no such physical obstacle on the 2A7V and 2A8 either because the other Leopards and Strvs using the L44 gun share the exact same turret and hull structure. And if there is one, I’d like to know where it is. On the other hand, if the report is about the L55A1 gun and that is Gaijin’s stance, then the “3 TD” model should also have -7.4; that is what I am trying to explain.
No-one has yet explained why the elevation is also reduced if it’s only due to the SPECTUS camera being below the gun.
Also didn’t Norway also list the elevation / depression as being lower on the 2A8 (something like -7.67/+17.67)? So it’s not just the one questionable brochure saying it was reduced.
So in short, are you saying this is actually about the L55A1 gun itself being limited to -7.4?
No.
The Norwegian 2a8 poster I wouldn’t believe fully yet. It’s likely copy and pasted from 2a7NO
I’d wait until the German ones