The penetration depth of “dtc10-125” in the game is stated as 10m577mm, which is incorrect.
The “DTC10-125” armor-piercing fin-stabilized discarding sabot projectile has a total flight body length of 665 mm, a penetrator length of 615 mm, a tungsten alloy rod length of 600 mm, a rod diameter of 24.4 mm, and a rear tungsten carbide section of approximately 65 mm. Based on calculations, the penetration depth of the 600 mm rod alone is estimated to be 590.8 mm. According to simulations in relevant studies, at high velocities (1600 m/s, with the third-generation projectile having a muzzle velocity of 1760 m/s), the penetration depth of a rod with a tungsten carbide proportion similar to that of the third-generation projectile is approximately 1.07 times that of a
single rod. Therefore, the estimated vertical penetration depth of the “DTC10-125” armor-piercing projectile is roughly 590.8 × 1.07 = 632.156 mm.
Source: 吴群彪,沈培辉,刘荣忠. 后置组合杆体侵彻机理研究Research on Penetration Mechanism of Post-Composited Rod [J].兵工学报,2014(10):1536-1541.
Length measurement data of “dtc10-125”
Instructions for DTC10-125
