- Yes
- No
Introduction:
Spoiler
Dongfeng Warrior is a new generation of high mobility military off-road vehicles independently developed by Dongfeng Motor Company in China, has been developed to the third generation, the third generation Warrior is on the basis of the previous two generations, especially the army using CSK131 series and CSK141 series of experience on the new development of the warrior car family, in all aspects than the second generation is greatly improved. The shape is more thick and solid, and the armor protection ability is enhanced, and the three generations of the warrior car family has developed a 4x46 x6 standard shaft and a long shaft. Assault vehicles, reconnaissance vehicles, medical vehicles, transport vehicles, radar vehicles, artillery vehicles, communication vehicles and other high mobility models.
The main character of the proposal, the CS/SW9, is a variant of the Dongfeng Warrior chassis, which was first unveiled at the 14th Zhuhai Airshow in 2022, followed by its experimental phase in the introduction screen at the 15th Zhuhai Airshow in 2024.
CS/SW9 adopts the third-generation Dongfeng East Wind Fierce Warrior armored vehicle as the chassis, equipped with a maximum output of 300 horsepower Dongfeng Cummins ISDe 300 40 type of medium-cooled diesel engine, the maximum speed can reach 120 km/h, the maximum mileage is not less than 600 km, can easily climb 60 degrees of steep slopes, And can park on the slope of 40 degrees, the whole car weighs 8 tons, 5.165 meters long, 2.36 meters wide, 2.15 meters high, the wheelbase is 3.4 meters, the minimum ground clearance 400mm
The main weapon is a long-barreled 30mm cannon, which can fire 30mm APFSDS, APDS, and HE rounds. The auxiliary weapon is a 7.62mm co-axial machine gun.
The hull is protected against 7.62mm bullets
Possible ammunition:
Parameters:
Spoiler
Country of origin: China
Passenger capacity: 6
Main weapon caliber: 30mm
Auxiliary weapon caliber: 7.62mm
Engine model: Dongfeng Cummins ISDe 300 type 40 intermediate cooled diesel engine
Engine power: 221kw
Engine horsepower: 300hp
Torque: 1100nm
Transmission: six speed mechanical manual transmission
Total weight: 8 tons
Maximum speed: 120km/h
Length: 5.165 m
Width: 2.36 meters
Height: 2.15 meters
Wheelbase: 3.4 m
Minimum ground clearance: 400mm
Approach Angle Departure Angle °60/40
Longitudinal passage Angle °30
Maximum climb grade °60 per bike
Slope standing capacity °40
Minimum turning radius 8m
Maximum vertical obstacle crossing height 450mm
Maximum trench width 700mm
Maximum wading (no preparation) 700mm prepared 1200mm
100 km fuel consumption ≤18L
The maximum driving distance is 600km
Number of cylinders: 6 cylinders 6.7 L
Photos:
Parameter data source:
Spoiler
Source of information: