众所周知在空战键鼠操控中，键盘拉杆就是满杆，鼠标拉杆也接近满杆，但是大部分飞机满杆会造成能量的损失进而速度下降，此时飞机就不在回转包线的高点上从而回转效率反而下降。一般来说解决方法是用鼠标一点点地拉杆，或者键盘拉杆时间断地推杆来实现空杆。但这样的操作多半麻烦，所以我提议给一个可以设置自定义杆量的切换档位，比如一档位下键盘拉杆是飞控的80%杆量，二档位下键盘拉杆是飞控的100%杆量，这样在确定要和敌机进入稳盘时，我们可以切换至一档位来实现降低能量损失，让飞机速度控制在回转包线的较高点上。这样可以简化操作为玩家提供更多的操作空间。 As we all know, in air combat keyboard and mouse control, the keyboard lever is at full lever, and the mouse lever is also close to full lever. However, full lever for most aircraft will cause energy loss and decrease in speed. At this time, the aircraft is not at the high point of the rotation envelope and thus The rotation efficiency decreases instead. Generally speaking, the solution is to use the mouse to pull the bar little by little, or to push the bar intermittently while pulling the bar on the keyboard to achieve an empty bar. But such an operation would be troublesome, so I propose to provide a switching gear that can set a custom lever amount. For example, in the first gear, the keyboard lever is 80% of the flight control lever, and in the second gear, the keyboard lever is 100% of the flight control. % lever amount, so that when we are determined to enter a stable position with the enemy aircraft, we can switch to the first gear to reduce energy loss and control the aircraft speed at a higher point of the rotation envelope. This simplifies operations and provides players with more room for operation.
2 Likes