Although I’d need to see the inner side of the tank. Surviving a Kornet is more plausible for a Merkava MK 4 imo than DM53. Overall in game, it’s funny because the BMPT can both pen you frontally with cannons and ATGMs relatively ez, I don’t even mean, they degraded/knicker off the composite. I mean one shot penetrations.
Now that should be addressed. At least if it has extreme CE & HE protection in most sections it would fill a more proper niche. Even if it’s for balance.
I wonder if there is at least a 3D simulation of this effect side by side with the actual data on the turret. I think that would really put things into perspective if we know the full composition of the modules and the underlying turret shell (in game it’s mostly 80mm around the front yes?).
Thank you so much for taking the time to answer my question!
It’s great to know that even a conservative approach can stop a DM43!
We should also consider how armor reacts differently depending on the length of the rod for each penetrable module…
That said, especially when you consider the RHA structure of the turret itself and the improved Armorshield KE—which is effective against kinetic energy rounds—it might be possible to stop a DM53 fired from an L44.
I’m not a native English speaker, so my reply will probably be a mess, but I think I generally understand what you’re trying to say.
Thank you so much.
I’m looking very closely and it doesn’t look all that thick between the gap. Like it looks to be worth 2-3 layers of Relikt thick. If it’s 3 layers of SLERA plates. I’d imagine they’d need to be worth at least on the higher end between what K5 and Relikt provide in game (200mm). Assuming they’d react to KE threats at all. It would end up 680mm of KE protection for one shot placed in that area.
But if it is worth 2 plates of side Relikt that’s 440mm KE plus the 80mm assumed turret husk. Of which the Merkava Mk 4 in game can already achieve. The way it’s modeled, it’s modeled like IRL ERA with how inconsistent the protection is. As ERA doesn’t have uniform protection in its rectangle or square block. It’s more elliptical of a protection. With the middle being stronger than the corners and edges if IIRC?
Kinda how the Oplot is represented in game. I wonder if that’s part of what’s going on there as to why you’d go from 520mm-600mm down to 455mm in some places.
Um, what are you trying to say…?
The three structural components on the front of the Merkava’s turret itself can withstand a DM43 round. Is that clear so far?
So aren’t you talking about the rear armor plates after that?
Otherwise, I think you might be seriously misunderstanding something.
This thing
That article explained that the armor here can definitely withstand the DM43.
I think so Basically, it should nullify the DM43’s performance
Come to think of it, do you know anything about the part shown in the first photo?
Is there an Orlite plate inside?
Well yes, if you go back to my article the “orlite plates” are present at the front turret modules and perhaps also inside the UFP modules. The latter I couldn´t confirm yet (and it would change the protection estimate a lot vs APFSDS if there wouldn´t be there). In my article I also made a rough sketch showing how I interpret -starting from pictures of battle damaged modules- what the front turret module inner structure may be like.
Sorry, I didn’t explain myself clearly enough.
My question is about the vertical section at the base of the turret’s front armor. I was wondering if you know whether this section contains SLERA, is hollow, or is made of Orlite.
I’m going to go reread the article.
You completely cropped out the part I was focusing on lol. The wall (covering) isn’t where the armor plating actually ends. There are supports that extend and still don’t meet the end of that inner covering. That bolted on support isn’t armor. So it’s about as thick as 2-3 K-5 plates. Hell, even someone’s source here describes 3 plates physically of SLERA which look slightly thinner than some Russian ERA.
What makes this difficult is that like K5. Different blocks have different spacing/differing thicknesses. I’ve seen some damaged Merkavas MK 4s with more thinner plates (without the wall shielding) what looks to be 5 or so plates. But I’ve also seen damaged blocks that have thicker (about K5 level) have 3 plates or less on the exact same block. But generally, it doesn’t typically match that inner wall shielding in thickness. The only time I’ve seen that be the case was with the 5 plates.
This is Kontact 5
Note how the supports you can see aren’t covered as well by the shielding like they are in the Merkava. You can see these supports fully side on. On the composite block for the Merkava you have to be looking inside to see them. Indicating the armor doesn’t end at that hollowing of that shielding. It is physically thinner than that hole implies.
That beam isn’t armor itself & you can see as the spine itself is meant to be structural, and doesn’t cover the entire block.
I have no sources indicating what might be there, my gut says its just for structural support since thats where all the Orlite-SLERA arrays are bolted to and in turn that the part that interfaces and locks with the base turret, so its gotta be structurally very strong.
I think I might understand what you’re saying.
The sides of the Merkava’s turret are made up of about nine layers of armor plates.
However, the front of the turret is composed of three composite plates made of NERA and SLERA.
A total of 180 mm or more on the front of the turret.
A combination of SLERA and NERA plates—each 60 mm or more thick—might indeed surpass the efficiency of Relic when combined with the patented multi-layer armor and ollite plates. However, I want to point out that SLERA alone cannot achieve that level of performance.
I think we are cooked boys. I can’t get any answers about the merks armor reports or anything. Just the same regurgitated answers. “Still being considered” or “no plans” like why even make a bug report if it’s not even gonna get fixed for 4 years of being accepted. But hey we sure as hell can get nerfs because gaijin thinks that the armor quality multiplier of the merks are less than rubber fabric screens in KE efficiency.