Bob Semple Tank - Wrath Incarnate

Next year April fool event!!!

people who complete event can get this bad boyyyyy

this will be fireeeeee as hellllllllllll!!!

imagine getting god mode with Bob Semple Tank

3 Likes

Only if they get AP rounds, and even then they’ll struggle against most WW1 tanks.
It would be able to engage armored cars though, so the Semple can strike true fear in the hearts of its enemies.

2 Likes

Which? M3, M5 or M6? They have different Barrle lengthes, velocitys and types of recoil compensation.

2 Likes

Should be the M3 :)

2 Likes

A yes killing chaparrals with bob semple

1 Like

Hell yeah, +1. Perfect event vehicle, even if it won’t be practical, and the 37mm version could be added as a prem so everyone has a chance to bask in it’s glory.

3 Likes

The 37mm Cannon wasn’t due to the time. The Kiwis were fearful that the Japanese were gonna attack any time soon within a couple of weeks. So the travel for US 37mm’s, copies of blueprints, and other sorts just wouldn’t be possible.

1 Like

Uh! awesome! Add this in an April’s fool event!

1 Like

As a Yugoslav, I declare a challenge to the Bob Semple supremacy.

IMG_0162

8 Likes

I feel like it would be a tad bit OP

1 Like

+1 it’s an icon (maybe it can also surpass the light AA MK1 in being the worst spaa in the game).

1 Like

khtz-16 can also come in as a challenger
image
image
image
(for only bein 70-90 of these fellows ever made there are way too many photos)

they where sort of a weapon of pride. Its a ya there are lot of issues but we will resist at all costs.

Could be a great infantry support vehicle.

2 Likes

Some more info about the Bob Semple tank from Archives New Zealand,

Originally two tractors were considered for conversion into tractor tanks, the R.D.6, and the R.D.8, with conversion to being a tank (armour, fittings, turret, etc, but not including weapons or ammo), being speculated to cost £320 and £500 respectively. The cost of the 37mm main gun was £650, and the cost of a .303 Browning MG at £190, all to be shipped from the US, more specifically from Philadelphia [1].

The R.D.8 would be selected over the R.D.6, due to its larger size, and thus room for the crew to maneuver and ability to fit the guns, which at this point armament is still specified at 1x 37mm Cannon & 3x .303 MGs. The docs in this archive do not mention why this armament was not procured and fitted sadly.

The Frame of the armour of the Bob Semple was planned to be 9/16" (14.2mm) mild steel plates from the SS Port Bowen, which was grounded off Wanganui at the time. [2].This can be confirmed by source [4], which compared a 9/16" mild steel plate bolted to a 1/2" manganese steel plate, to the 9/16" plate bolted to a ‘vee corrugated plate’ The plates were tested by firing a .50" Vickers MG at it from 100 yards. Source [5] and [6] shows the results of the Armour tests to the 9/16" + V.Corrugated plate, three rounds penetrated both plates, but two ricocheted and did not pen.

During the design process the District Engineer, T.G.Beck, proposed a new gearbox, to be installed between the R.D.8’s existing gearbox, and the clutch. This gearbox was to increase the RPM to 1200, and increase speed to 15mph. I don’t think this ever went further than this letter. At this point the project is still called the ‘R.D.8 Tank’ [3], later in development this was changed to the ‘25-ton Tractor Tank’.

Source [7] confirms that the vehicles were returned to standard D.8 bulldozers from at least 1944, with everything taken off was scrapped or repurposed. However, before this was done the Bob Semple was evaluated by the Superintendent of Design in Australia, Lt Colonel Milner, along with the Schofield Wheel-Cum Track vehicle.



I forgot where exactly I got these, but it is defiantly from Archives NZ


Note: The archive I got this from is big, and I’ve probably missed something in it, so feel free to look for yourself, I’ve sourced everything and given pages.

I also have this source, but I have not looked through it yet, it might be helpful, Archives NZ code: R24160403, record number E18.


More Photos that I haven’t seen posted here before:


You already have this one in the suggestion, but this copy is higher quality :)







Sources:

Source 1:


Source 2:


Source 3:


Source 4:


Source 5:

Source 6:



Source 7:


7 Likes

+1
Love this idea and I would like to see more Kiwi stuff out there.

1 Like

Fun fact, that’s not corrugated iron on the hull but ERA so advanced that even modern MBTs could not pen it.

3 Likes

This could be a worthy Dreams Come True Event Vehicle, given its fame and being a very iconic vehicle. The 37mm gun could be an optional modification. Similar to the GWP of the TOG II.

Should be added and get the same BR 6.3 as T20, because both are equally OP.