Making Russian Tank Protection more realistic

you should have a private link

Well, a very dubious photograph that does not identify itself in any way, despite the fact that the identification mark looks very good than the tank itself.

As for penetration, everything is the same, there could be several hits of shells

Yes, I recieved

1 Like

Are you trying to suggest the “identification mark” was painted on after the fact, and that it isn’t really a destroyed Russian tank? That’s wild bro.

5 Likes

Wildly, this is when such garbage is posted every day and people believe for some reason blindly in it, without trying to penetrate

Different angle of the tank. Note on previous photo the penetration is on the right hand side near the bottom of the 3rd RELIKT block from the left. The penetration is in the exact same spot in this photo.

7 Likes

Same photo as above, I understand? Or another tank?

same tank, different angle

2 Likes

Then why is the identification mark different?

again, your reflection plate doesnt seem to exist.

1 Like

image

Maybe, won’t deny

1 Like

Theres no air gap
just 50+35+50+35+50

Refer to the image of destroyed T-80BVM

T-80BVM is just 220mm thick composite at 68 degrees - 587mm LOS
My calculation shows that the base hull is equivalent to 188.4mm at 68 degrees - 503mm LOS
587 / 503 = 0.86x KE effectiveness

When APFSDS penetrates 188.4mm at 68 degrees - 503mm LOS, it defeats 404mm KE at 0 degrees.

3BM42 penetrates: 395mm at 2000m at 0 degrees, 450mm at 0m at 0 degrees

Obviously then theres the RELIKT on top of that.

1 Like

Well, as it were:

Spoiler

Why are you counting 0 degrees? Not 30/40 for example?

Because the upper plate of T-64 / T-72 / T-80 / T-90 is sloped at 68 degrees

Imagine the T-34-85 has 260BHN steel upper plate [doesnt in real life i know]
It has 45mm thick steel plate sloped at 60 degrees.

When APFSDS penetrates 45mm at 60 degrees - 90mm LOS, it has 77mm KE pen at 0 degrees

So 0 degrees is considered a straight line, just like 90 degrees. The calculation of penetration is just calculated from the location of, for example, the upper frontal part of 68 degrees, respectively, it cannot have the same values as at 0.

No need to, I also already play the game before.
Also the old forum is gone cause its architecture was bad compared to this one, that’s it.
No grand conspiracy.

the architecture of this here is bad the old one was structured fine

3 Likes