- Yes
- No
Hello everybody. I’d like to suggest an F6F-3 Hellcat for the US aviation tech tree and place it in a folder with the F6F-5. It is the first production variant of the F6F family and has extensive service in the US Navy. Despite being overshadowed by its successor - the F6F-5, I believe this F6F-3 is overdue and belongs in the game. I will explain the differences between -3 and -5 below.
History
Design and developmentSince 1938, Grumman had been working on a new fighter after the F4F Wildcat. Satisfied with the design proposal, the US Navy rewarded a contract to Grumman to develop the XF6F-1 prototype on June 30, 1941. This XF6F-1 was fitted with a Wright R-2600 Cyclone engine of 1,700 hp.
War over the Pacific has revealed the US Navy’s need for a powerful fighter to counter Japan’s air superiority - mainly due to A6M Zero fighters - and replace their Grumman F4F Wildcats. Although the A6M Zeroes are more maneuverable and possess a better rate of climb than Grumman F4F Wildcats, the Wildcats did have some advantages over the Zeroes with their superior armor, heavy armament, and dive rate. Using these advantages as lessons, Grumman retained these features to develop the next XF6F-3 prototype fitted with the new Pratt & Whitney R-2800 Double Wasp.
The Cyclone-powered XF6F-1 with serial # 02981 concluded its first test flight on June 26, 1942; One month later, the Double Wasp-equipped XF6F-3 with serial # 02982 made its first test flight on July 30, 1942. The USN was satisfied with the results of test flights and immediately gave Grumman a contract to initiate a large-scale production for the F6F-3 Hellcat.
Operational Service (1942-1945)The first production F6F-3 made its first flight on October 3, 1942. The first batch of fresh F6F-3s was delivered to VF-9 on USS Essex (CV-9) in February 1943. The USN enjoyed the flight qualities of the F6F-3 compared with the Vought F4U-1 Corsair since the F6F-3 was more successful at carrier landings and tough enough to withstand rigorous carrier operations. The USN transferred the Corsairs to the USMC stationed in the South Pacific after being unsatisfied with the Corsairs in carrier landing trials.
The F6F-3s had their first combat in a raid against the Japanese bases on Marcus Island on August 31, 1943, from Yorktown (CV-10). They destroyed eight twin-engine bombers on the ground with only two losses to anti-aircraft fire and one loss to engine trouble. Then, on September 1, 1943, a Hellcat, operating from USS Independence (CVL-22), managed to score its first aerial kill, claiming a Kawanishi H8K ‘Emily’ flying boat over Howland and Bakers Islands.
Another large-scale carrier operation began in October 1943 with a strike against a Japanese base on Wake Island. Four carriers launched squadrons of Hellcats and bombers on October 5 at early dawn. When they were within 50 miles away, they got detected by Japanese radar on the island, and the Zeroes scrambled and were en-routed to intercept them. The aftermath of raids showed that the F6F-3 Hellcats destroyed 22 of 34 Zeroes from the island, with only 12 American planes lost - 6 to the Zeroes and 6 to AA gunfire.
In early November, the USN launched a strike on a large Japanese base at Rabaul, New Britain. F6F-3s and F4U Corsairs engaged in day-long fights with numerous Zeroes. Again, the Hellcats overmatched the Zeroes and claimed nearly 50 kills alongside the Corsairs for a few Allied losses. Other squadrons of F6F-3 Hellcats saw significant action over Tarawa, participating in dogfights and ground attacks to support amphibious landings. In one of the raids, the F6F-3s achieved a significant aerial victory against the Japanese aircraft over Tarawa; they engaged in a dogfight with Zeroes and claimed 30 kills with one loss of F6F-3.
The F6F-3 Hellcats proved superior to their Japanese opponent in almost all performance categories, including at high altitudes. Only the Zeroes could out-turn the Hellcats at slower speeds, retaining that advantage throughout the war; however, this advantage got nullified as pilots of the Hellcats were avoiding Zeroes in turn fighting and using their high-speed performance to engage them at favorable conditions. The lightly armored Zeroes were also no match for the Hellcats’ six .50 cal guns.
The F6F-3 Hellcats were involved in almost all engagements with the Japanese aircraft from these years onward. The F6F-3s were the primary fighters during the Battle of the Philippine Sea, where they shot down many Japanese aircraft. That aerial part of the battle was nicknamed the Great Marianas Turkey Shoot. The Hellcat became the ace-maker aircraft in the US military inventory with 306 Hellcat aces, a spectacular record.
F6F-3s served and received a minor modification throughout the war and its end; however, in the middle of 1944, Grumman introduced the F6F-5 into the service. The F6F-5’s important feature was its versatility; it could carry rockets and more bombs. This was emphasized because the F6F-5’s versatility reduced the number of bombers on the carriers. In exchange, these Hellcats could carry out a variety of missions.
Grumman built a total of 4,402 F6F-3s and completed its production in April 1944, and then Grumman switched its production to the F6F-5, eventually producing up to 12,275 as a total (the last F6F-5 was built in November 1945).
The Hellcats claimed the aerial victories of 5,203 Japanese aircraft in the Pacific and 13 German aircraft in Europe for a loss of only 270 F6Fs. Hence, this is a kill-loss ratio of 19 to 1. The Hellcats were excellent escort fighters for the carrier-based strike aircraft. Only 42 carrier-based bombers or torpedo aircraft are known to have been lost to the Japanese aircraft in the air, with the Hellcats in service from 1943 to 1945.
Key Differences (F6F-3 vs F6F-5)
-
Engine cowling
→ F6F-3 (Early Model) has bulges and extra cowling flaps on the bottom of the engine section; F6F-5 (Late Model) omits these. -
Windscreen
→ The -3 (Early Model) has an armored glass frame inside its outer windscreen; the -5 (Late Model) incorporates bulletproof glass directly into the windscreen. -
Instrument panel
→ Both have different instrument panels; the -5 has a reflector panel for better illumination during night flying and incorporated some minor changes as noted in the handbook. -
Visibility window
→ The -3 (Early Model) has a rear vision window behind its cockpit; the -5 (Late Model) deletes its rear vision window. -
Armament
→ The -3 (Early Model) can be armed with 2 x 500 lb or 1000 lb bombs but is not rocket capable; -5 has much more ground weaponry and is rocket capable. -
Water injection
→ The -3 has a standard 2,000 hp R2800-10 engine; The -5 incorporates the water injection in its 2,200 hp R2800-10W engine, slightly boosting up more horsepower. -
Aileron
→ The -3 has a servo tab on the left aileron and a fixed tab on the right; the -5 has a servo tab and fixed tab on each aileron.
Specifications
Grumman F6F-3 HellcatGeneral Characteristics
- Crew: 1 (Pilot)
- Length: 33 ft 7 in (10.24 m)
- Height: 14 ft 5 in (4.39 m)
- Span: 42 ft 10 in (13.05 m)
- Wing Area: 334 sq ft (31.03 sq m)
- Propeller Type: 3-bladed constant-speed propeller
- Propeller Diameter: 13 ft 1 in (3.9878 m)
- Powerplant: Pratt & Whitney Double Wasp R-2800-10 radial piston engine with a two-stage supercharger
→ 2,000 hp (1,471 kW)- Internal Fuel: 250 US gal. (946 L)
- Oil Tankage: 19 US gal. (71.9 L)
- Empty Weight: 9,207 lb (4,176 kg)
- Gross Weight: 12,575 lb (5,704 kg)
- Max. Takeoff Weight: 15,412 lb (6,990 kg)
Engine Ratings
Takeoff:
→ 2,000 BHP @ 2,700 RPM @ S.L.
Combat - Five Minute Limit:
→ 2,250 BHP @ 2,700 RPM @ S.L.
→ 2,135 BHP @ 2,700 RPM @ 12,400 ft
→ 1,975 BHP @ 2,700 RPM @ 16,900 ftMilitary:
→ 2,000 BHP @ 2,700 RPM @ S.L. - 1,700 ft
→ 1,800 BHP @ 2,700 RPM @ 15,750 ft
→ 1,650 BHP @ 2,700 RPM @ 21,000 ftNormal:
→ 1,675 BHP @ 2,550 RPM @ S.L. - 5,500 ft
Performance
- Power to Weight Ratio: 0.16 hp/lb (0.26 kW/kg)
- Sea Level Speed: 314 mph (505 km/h) @ military
- Critical Altitude Speed:
- 372 mph @ 18,000 ft (598 km/h @ 5,486 m) @ combat
- 373 mph @ 23,400 ft (600 km/h @ 7132 m) @ military
- Stall Speed:
- Gross Weight: 87.2 mph (140 km/h)
- Without Fuel: 81.8 mph (131 km/h)
- Wing Loading: 37.7 lb/sq ft (183.8 kg/sq m)
- Takeoff Distance - Calm: 640 ft (195 m)
- Rate of Climb: 3,250 fpm (16.5 m/s)
- Time to Altitude:
- 3.2 minutes to 10,000 ft (3,048 m)
- 7.0 minutes to 20,000 ft (6,096 m)
- Service Ceiling: 37,000 ft (11,277 m)
- Max. Range: 630 - 1,340 miles (1,014 - 2,157 km)
Armament
- Guns:
- 6 x .50-cal. M2 Browning machine guns (2,400 rounds)
- Bombs:
- 1 x 2,000-lb bomb
- 1 x 1,600-lb armor-piercing bomb
- 3 x 1,000-lb bombs
- 3 x 500-lb bombs
- 2 x 250-lb bombs
- 6 x 100-lb bombs
- Torpedo:
- 1 x MK.13-3 Torpedo
- Rockets:
- 3 x 11.75-inch Tiny Tims
- 6 x 5-inch HVARs
- Drop Tanks
- 1 x 150-gal. fuselage drop tank
- 2 x 100-gal. wing drop tanks
F6F-3 Livery Examples --- Illustrations
Conclusion | Why it should be in the game
My purpose for this suggestion is to expand more WW2 aircraft content for War Thunder. This F6F-3 Hellcat would make a welcoming addition to the Hellcat family; it could go to the tech tree foldered with the F6F-5 Hellcat. The F6F-3 Hellcat has minor differences in its appearance and has some fine paint schemes as potential unlockable skins. It does have provisions to carry bombs in limited amounts.
See Also
I made suggestions for XF6F-4 (four cannons) and XF6F-6 (four blades). If you’re interested in these suggestions, check them out!
- Preliminary Pilot’s handbook Model F6F-3 Airplane Hellcat (28 July 1943)
- F6F-3 Hellcat Airplane Characteristics & Performance (1 October 1945)
- Pilot’s Handbook for Navy Models F6F-3, F6F-3N, F6F-5, F6F-5N Airplanes (1 May 1946)
- F6F Performance Trials
- F6F-3 Hellcat
- Grumman F6F-3K Hellcat | National Air and Space Museum
- F6F 'Hellcat'
- https://acepilots.com/planes/f6f_hellcat.html
- Grumman F6F Hellcat - Wikipedia
Thank you for taking the time to read my suggestion! 😃